#
#   *-*-*   BPS.DUAL   *-*-*
#
#   iRMX III MSA Bootstrap Parameter String configuration file for use on
#   dual-disk Multibus II Microcomputers when:
#      1) an iSBC 386/258 board boots Independently from its local
#         SCSI I/O subsystem and executes in an I/O controller-only mode.
#      2) two CPU boards boot Quasi-independently from separate
#         disks. 
#
#   NOTE: this config file must be present on both system disks.
#
#   Refer to /msa32/read.me for a description of the BPS and SPS parameters.

#   The iSBC 386/258 must be in slot 0; the QI-master CPU must be in slot 2.
#   BPS Parameters for an iSBC 386/258 board booting Independently.
#

[bl_host_id = 0]
	bl_target_file = /msa32/boot/386258io;
	bl_qi_master = 2

#   BPS Parameters for a CPU board in slot 2 booting 
#   Quasi-independently from the first disk.
#

[bl_host_id = 2;
	bl_method = quasi]
	bl_target_file = /msa32/boot/386120net;
	bl_unit = 2;
	rq_pci_a = bnam:386/258,bin:1,sin:0;
	rq_pci_b = bnam:386/258,bin:1,sin:1; 
	rq_atcs_con = bnam:386/258,bin:1;
	rq_atcs_a = bnam:186/410,bin:1;
	rq_atcs_b = bnam:186/450,bin:1;
	rq_atcs_c = bnam:MIX386/020,bin:1;
	rq_atcs_d = bnam:386/120,bin:0,sid:31;
	rq_dlj = dev:SCW_2,fdvr:named;
	rq_mip = bnam:186/530,bin:1,dev:SCW_2,file:/NET/INA961.36L;
	rq_sd = SCW_2

#   BPS Parameters for a second CPU board in slot 3 booting 
#   Quasi-independently from the second disk.

[bl_host_id = 3;
	bl_method = quasi]
	bl_target_file = /msa32/boot/386120;
	bl_unit = 3;
	rq_pci_a = bnam:386/258,bin:1,sin:0;
	rq_pci_b = bnam:386/258,bin:1,sin:1; 
	rq_atcs_con = bnam:386/258,bin:1;
	rq_atcs_a = bnam:186/410,bin:1;
	rq_atcs_b = bnam:186/450,bin:1;
	rq_atcs_c = bnam:MIX386/020,bin:1;
	rq_atcs_d = bnam:386/120,bin:0,sid:31;
	rq_dlj = dev:SCW_3,fdvr:named;
	rq_sd = SCW_3